D5 when moving through a scene with Frame generation turned on to any of the options given, the scene tends to warp, glitch or distort. I have an RTX 5070 Card and running the D5 2.11.1 with latest Nvidea Studio driver 581.57.
Hope this issue will be solved soon as frame generation does boost the overall fps count technically, but is not usable and is unbearable with the scene warping that happens when moving through the scene. so i keep it turned off.
Hi @Ameez
Sorry for the inconvenience caused. Does this problem only occur when Frame Generation is turned on?
If possible, could you provide a short screen recording showing the issue while navigating the scene? Thank you.
Yes It only happens when frame generation is turned On. otherwise its all good. but Frame generation is very useful in heavy models as it does boost the frame rate but cant use it because of the warping effect caused.
Screen recording of the warping effect. happens in all frame generation settings- auto, x2,x3, and worst is x4.
Hi @Ameez
Thanks for attaching the video — that helps a lot. This is a known issue with Frame Generation in the version 2.11. You may refer to this similar thread in our forum for reference:
The dev team is already aware of the problem and is working on optimizations for future updates. In the meantime, the recommended workaround is to keep Frame Generation turned off during navigation to avoid the distortion. Thanks for your understanding. 